首页 打印机驱动下载 扫描仪驱动下载 品牌 说明书 驱动 万能驱动 硬件知识 软件

Windows蓝屏USER_MODE_HEALTH_MONITOR修复教程

更新时间:2023-07-24 12:00 来源:互联网 小编:" 梦里花ㄣ"

蓝屏代码0x0000009E代表"USER_MODE_HEALTH_MONITOR",这意味着在用户模式下检测到了健康问题。通常,此错误表示操作系统检测到一些影响系统稳定性的问题,可能是由于软件冲突、设备驱动程序故障或硬件故障等原因引起的。这个错误提示通常需要进一步诊断和解决才能恢复系统的正常运行。

Windows蓝屏USER_MODE_HEALTH_MONITOR修复教程

要解决这个问题,可以尝试以下方法:

方法一:硬件故障排除

检查系统硬件部件(例如内存、硬盘、显卡)是否正常工作,尝试重新连接或更换有问题的部件。

方法二:执行内存诊断

运行Windows自带的内存诊断工具,可以检查计算机的内存是否有问题,并进行修复。

方法三:检查病毒和恶意软件

运行强大的杀毒软件并扫描系统以查找任何病毒、恶意软件或未经授权的程序,这些恶意软件可能会干扰系统的正常运行,引发蓝屏错误。

方法四:使用一键修复工具助手(强烈推荐)

1、首先你的电脑必须下载与完成安装完成快快蓝屏修复助手。如果你还没有安装点击下方链接下载。

下载地址:>>>快快蓝屏修复助手<<<

提示:安装路径不要选择C盘,避免产生问题造成损失。

2、找到你电脑中的快快蓝屏修复助手,点击进入。看到首页后,点击首页一键扫描按钮开始扫描。等待几分钟,就能获取你急切想要的结果。

Windows蓝屏USER_MODE_HEALTH_MONITOR修复教程

3、扫描完成后会显示电脑的所有蓝屏记录以及蓝屏的详细信息。

Windows蓝屏USER_MODE_HEALTH_MONITOR修复教程

4、解决方案页面显示了导致该次蓝屏的具体原因和解决方案,点击右上角的一键修复进行修复。

Windows蓝屏USER_MODE_HEALTH_MONITOR修复教程

5、切记,当修复完成之后我们还是需要重新启动计算机的。毕竟一切修复的结果,需要重新后,才能被系统认可。

Windows蓝屏USER_MODE_HEALTH_MONITOR修复教程

当你完成重启后,你电脑的蓝屏问题已经基本解决了。相信小编,不要急需卸载快快蓝屏修复助手。毕竟它强大的功能是你未来的一个保障,可以随时随地为你服务,让你再次遇到蓝屏问题不在抓狂。

其他相关信息:

USER_MODE_HEALTH_MONITOR bug 检查 的值为 0x0000009E。 此 bug 检查指示一个或多个关键的用户模式组件无法满足运行状况检查。

USER_MODE_HEALTH_MONITOR参数

参数 描述
1 在配置的超时中无法满足运行状况检查的进程
2 运行状况监视超时(以秒为单位)
3 监视器源。 与进程地址结合使用有助于确定创建了此监视器的子组件。 其值如下所列。
4 保留

VALUES

0  : WatchdogSourceDefault
      Source was not specified
1  : WatchdogSourceRhsCleanup
      Monitors that RHS (Resource Hosting Subsystem) process goes away when
      terminating on graceful exit
2  : WatchdogSourceRhsResourceDeadlockBugcheckNow
      RHS was asked to immediately bugcheck machine
      on resource deadlock
3  : WatchdogSourceRhsExceptionFromResource
      Resource has leaked unhandled exception from an entry point,
      RHS is terminating and this watchdog monitors that
      process will go away
4  : WatchdogSourceRhsUnhandledException
      Unhandled exception in RHS.
      RHS is terminating and this watchdog monitors that
      process will go away
5  : WatchdogSourceRhsResourceDeadlock
      Monitors that RHS process goes away when
      terminating on resource deadlock
6  : WatchdogSourceRhsResourceTypeDeadlock
      Monitors that RHS process goes away when
      terminating on resource type deadlock
7  : WatchdogSourceClussvcUnhandledException
      Unhandled exception in clussvc.
      clussvc is terminating and this watchdog monitors that
      process will go away
8  : WatchdogSourceClussvcBugcheckMessageRecieved
      Another cluster node has sent message asking to bugcheck this node.
9  : WatchdogSourceClussvcWatchdogBugcheck
      User mode watchdog has expired and created netft watchdog
      to bugchecked the node.
       0xA : WatchdogSourceClussvcIsAlive
      Cluster service sends heartbeat to netft every 500 millseconds.
      By default, netft expects at least 1 heartbeat per second.
      If this watchdog was triggered that means clussvc is not getting
      CPU to send heartbeats.
      0x65 : WatchdogSourceRhsResourceDeadlockPhysicalDisk
       A subclass of WatchdogSourceRhsResourceDeadlock.
      0x66 : WatchdogSourceRhsResourceDeadlockStoragePool
       A subclass of WatchdogSourceRhsResourceDeadlock.
      0x67 : WatchdogSourceRhsResourceDeadlockFileServer
       A subclass of WatchdogSourceRhsResourceDeadlock.
      0x68 : WatchdogSourceRhsResourceDeadlockSODAFileServer
       A subclass of WatchdogSourceRhsResourceDeadlock.
      0x69 : WatchdogSourceRhsResourceDeadlockStorageReplica
       A subclass of WatchdogSourceRhsResourceDeadlock.
      0x6A : WatchdogSourceRhsResourceDeadlockStorageQOS
       A subclass of WatchdogSourceRhsResourceDeadlock.
      0x6B : WatchdogSourceRhsResourceDeadlockStorageNFSV2
       A subclass of WatchdogSourceRhsResourceDeadlock.
      0xC9 : WatchdogSourceRhsResourceTypeDeadlockPhysicalDisk
       A subclass of WatchdogSourceRhsResourceTypeDeadlock.
      0xCA : WatchdogSourceRhsResourceTypeDeadlockStoragePool
       A subclass of WatchdogSourceRhsResourceTypeDeadlock.
      0xCB : WatchdogSourceRhsResourceTypeDeadlockFileServer
       A subclass of WatchdogSourceRhsResourceTypeDeadlock.
      0xCC : WatchdogSourceRhsResourceTypeDeadlockSODAFileServer
       A subclass of WatchdogSourceRhsResourceTypeDeadlock.
      0xCD : WatchdogSourceRhsResourceTypeDeadlockStorageReplica
       A subclass of WatchdogSourceRhsResourceTypeDeadlock.
      0xCE : WatchdogSourceRhsResourceTypeDeadlockStorageQOS
       A subclass of WatchdogSourceRhsResourceTypeDeadlock.
      0xCF : WatchdogSourceRhsResourceTypeDeadlockStorageNFSV2
       A subclass of WatchdogSourceRhsResourceTypeDeadlock.

原因

硬件机制(如监视器计时器)可以检测基本内核服务未执行。 但是,资源不足问题 (包括内存泄漏、锁争用和计划优先级配置错误) 可能会阻止关键的用户模式组件,而不会阻止延迟的过程调用 (DPC) 或耗尽非分页池。

内核组件可以通过定期监视关键应用程序,将监视器计时器功能扩展到用户模式。 此 bug 检查指示用户模式运行状况检查失败,导致无法正常关闭。 此 bug 检查通过重启或启用应用程序故障转移到其他服务器来还原关键服务。

与所有 bug 检查一样,使用系统事件日志及时查找停止代码前面的事件。 应检查日志中立即发生 bug 检查的事件,以获取有关可能原因的信息。

另请参阅

使用 Windows 错误报告排查故障转移群集问题

故障转移群集系统日志事件

Bug 检查0x1C9 USER_MODE_HEALTH_MONITOR_LIVEDUMP

Bug 检查代码参考

驱动下载排行